Should You Get Your Fenton/South Ballwin Home Tested For Mold?

5/25/2023 (Permalink)

SERVPRO of Fenton/South Ballwin is here to help with mold remediation

SERVPRO of Fenton/South Ballwin is here to help with mold remediation.

When is time to get a sample for mold? If visible mold growth is present, sampling is unnecessary.

Surface sampling may be useful to determine if an area has been adequately cleaned or remediated. Sampling for mold should be conducted by professionals who have specific experience in designing mold sampling protocols, sampling methods and interpreting results.

Sample analysis should follow analytical methods recommended by the American Industrial Hygiene Association (AIHA), the American Conference of Governmental Industrial Hygienists (ACGIH), or other professional organizations.

Are there federal regulations or standards regarding mold testing?

Standards or Threshold Limit Values (TLVs) for airborne concentrations of mold, or mold spores, have not been set. Currently, there are no EPA regulations or standards for airborne mold contaminants.

Understanding Mold

When water intrudes into your property, mold growth can start in as little as 48 hours. Consider the following mold facts:

• Mold is present almost everywhere, indoors and outdoors.
• Mold spores are microscopic, float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or a pet.
• Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens and irritants.
• Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
• Mold often produces a strong, musty odor, and that odor can lead you to possible mold problem areas.
• Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

The Mold Remediation Process

Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. Learn more about our mold remediation process.

1. Emergency Contact - (636) 484-9460
2. Inspection and Mold Damage Assessment
3. Mold Containment
4. Air Filtration
5. Removing Mold and Mold-Infested Materials
6. Cleaning Contents and Belongings